MAGNET Field: GNSS and Depth Finder

Configuring Topcon Receiver and Depth Finder to survey 

Log in or sign up for myTopcon to view this page:

MAGNET Field: GNSS and Depth Finder

0 0

Configuring Topcon GNSS Receiver and Depth Finder

  • Launch MAGNET Field
  • Click Configure
  • Click Survey
  • Under GPS+ Configuration click  Select from Library button
  • Click  Add button 
  • Name the configuration with a very specific name
  • Select manufacturer
  • Select receiver model
  • Select communication parameters for RTK communication, in this case Internet for a network solution
  • Input IP address and port
  • Input local network credentials
  • Select Survey and Stake Parameters, as required, and click the green check mark