Spreader Settings Icons
Technician, factory, and diagnostics menu should not need to be used during normal use.
- Technician menu. Requires a password for access.
- Factory menu. Requires a password for access.
- Diagnostics menu. Requires a password for access.
- Return to the main menu.
- Product setup.
- Alarm setup.
- Cycle between primary screens.
- Select calibration mode, add weight / tare.
- Set full working width.
- Used to test the machine in the factory or if there is a problem with the normal forward speed signal.
- Start floor moving while spreader is stationary.
- Configure units and forward speed options.
- Reduce spinner RPM on the boundary.