FC-5000: Wi-Fi configuration with LN-100

How to establish a Wi-Fi connection between a LN-100 / LN-100W and a Windows 10 OS running on a FC-5000

Log in or sign up for myTopcon to view this page:

FC-5000: Wi-Fi configuration with LN-100

0 0

LN-100 Configuration:

  • Open the battery compartment of the LN-100
  • Check that the switch is set to Mode A
  • In case of a LN-100W make sure the second switch is set to WLAN
  • Power on the instrument

FC-5000 Configuration:

  • Click the Wi-Fi icon on the far right side of the Windows taskbar
  • Click on Network settings


All instructions can be applied to any device running a Windows 10 OS

  • Scroll down and enable Hotspot 2.0 networks and Paid Wi-Fi services

  • Click on Network and Sharing Center

  • Click on Set up a new connection or network
  • Click Manually connect to a wireless network
  • Click Next
  • Input Network name: LN-100_XXXXXX (Serial number of the LN-100)
  • Security type: WPA2-Personal
  • Encryption type: AES
  • Security key: 00_XXXXXX (Serial number of the LN-100)
  • Checkmark Connect even if the network is not broadcasting
  • Click Next
  • Click Close and finish creating profile
  • Click the Wi-Fi icon on the far right of the Windows taskbar
  • Select either of the LN-100 connections

  • Click Connect

  • Establishing the connection may take a few seconds

FC-5000 Configuration (Optional):

  • In case FC-5000 won´t connect open the Network settings again

  • Click on Manage known networks

  • Select the LN-100 network
  • Click on Forget
  • Follow the instructions of the FC-5000 Configuration again